Skip to main content

Bead Magazine Project - Copper Wirework and Ceramic Flower Earrings!


Look out for issue 45 of Bead magazine which was out on 13 March. Bead has a new look this issue and is full of Spring inspiration! There's quite a lot of floral action going on including a step-by-step project for my copper wirework earrings with ceramic flower beads.
 I love those beads!



 Seeing the photos has reminded me to dig out the rest of those ceramic flower beads and do something else with them. I bought a mix of colours including lilac, pink and yellow. I'd like to thread them onto copper or silver hoops then solder the hoops closed. I "think" the ceramic beads will stand up to the heat of the torch ok. Some strategically placed pliers would act as a heat sink and easy solder would make it a quick in and out job so I may well have a go soon.

Here's the colourful front cover of Bead magazine - it's so bright you can't help but be cheered up by it :D




Comments

  1. Those earrings are so cute:

    ReplyDelete
  2. I love these ceramic earrings! Really cool! You always have such lovely items available here!
    I was wondering if you would be interested in sharing your blog at Glipho? We are a new social blogging site dedicated to promoting our users' content, and could help your blog and business gain more exposure! You can even import all your old posts without affecting your existing blog, it's pretty easy. If you have a spare minute, take apeek at http://glipho.com and see what you think!

    All the best,

    Teo

    ReplyDelete
  3. i like ceramic earrings!i think so nice earrings

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco