Skip to main content

Spots, Studs, Etching and Hoops - New Earrings



I've been pretty busy recently with findings orders and copper bangle orders - some of them from my website which is slowly picking up buyers thank goodness (patience is a virtue!) So now they're done and I've got a bit of time I thought I'd better get some earrings made for my shops.

I decided I like the spotty look you get with nail varnish and etching so I went for some spotty silver and copper studs first ..........





Then I used some more etched copper I've had waiting in the wings until it found it's true vocation in life.....
in other words a couple of pairs of simple, quick to make earrings!





Then I felt all hoop inspired and made a few pairs of silver hoops with added lampwork and ceramic flower beads. I do love a hoop :D






So now that I have a few new items to add to my shops and website over the next week I can relax and get on with the next thing that's running round my brain which is..........enamelled supplies for people to use in their own designs. It will be mainly discs at first in a choice of colours and a couple of sizes. I'd love to include enamelled headpins but when I tried enamelling headpins a long time ago the results were pretty varied with lots of them cracking and bits of enamel falling off sometimes minutes, hours or days after they were made. I've read this is normal for other people too so they won't be featuring in my enamelled findings range as they would be too unpredictable and stress inducing!

So now you know what I will be doing over the next few days!

Comments

  1. So far, so good. Just love your work--and your honesty. Thanks for acknowledging (unlike others) that you shouldn't sell enamel that will crumble. I was interesting in the nail varnish resist, and your results are pretty convincing!

    ReplyDelete
  2. Really that’s great article, these points are very helpful, thanks for sharing with us.

    ReplyDelete
  3. SO love your blog and your jewelry. Not sure I found you, but I imagine it was through Etsy, or a search for saw piercing. Anyway, love love love your work.

    ~Kerry

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco