Skip to main content

Etched Copper Pendants with Enamel and Turquoise


I recently finished two copper pendants that had been waiting on the sidelines for quite a time while I finished some other orders. I'd managed to cut them out and file and sand the edges then some findings orders arrived and they were return to the "to do" pile. But at last earlier this week I managed to finish them!

I used a mendhi style stamp I got from Hobbycraft for a £1 with Stayz On ink to stamp the design onto the copper then etched for about an hour. I love these type of detailed designs. My ferric chloride was on it's last legs and took longer than usual - it would normally take about 40-45 mins to get the light etched look that I prefer.
*Tip!* If you're planning to use stamps for etching I've found the fine line designs work and look better than the thicker line ones.
I then sawed around the edge of the design, filed and sanded and made the bails. Strangely enough I have never made a bail like this before. I've made hidden bails and p shaped ones but not the type that solders to both sides of the pendant. I really like the look of it with this type of pendant and you can decorate them anyway you want by hammering, stamping or etching. I soldered the bail on first then the silver ball and the bezel last.


I'd made the pink enamel "cabochon" a while ago and hadn't got round to using it for anything else and the colour looked ok with the oxidized copper so at last it was given a home. I made turquoise version too. I say "turquoise" but the cab isn't real turquoise but some kind of stabilized (what does that mean?) or composite material dyed to look like turquoise. It still looks nice though :D



Making this type of bail has given me ideas for extending the front section to form part of the design on a pendant, maybe using contrasting metals or textures. Definitely an idea for my sketch book for a later date.

I'm currently working on some more enamel pendants with pierced out heart designs that I really enjoyed doing which obviously means someone has taken over my brain. I used to absolutely hate sawing metal and now I actually look forward to doing it. Whoever has taken over my sawing brain still breaks blades though..............

Comments

  1. Wow! I wish I could saw like that. Let alone do that wonderful job of etching. Lovely work!

    ReplyDelete
  2. These are gorgeous! I love that bail.

    Most turquoise comes to use stabilized. It sounds like a bad word but it is a process used to make the stone hard enough to wear and work with. It also protects it from our skin's oils. I hope that helps. :) Turquoise is very confusing though because there are a lot of fakes or color enhanced pieces out there.

    ReplyDelete
  3. Thanks for explaining about turquoise Val :D

    ReplyDelete
  4. Love those etched pieces! Haven't etched in a while as I've been enjoying the enamelling, I hope to combine the two someday soon. I love how you've been doing your own little cabochons, they're devine!

    ReplyDelete
  5. Lovely pieces, and thanks for sharing your techniques.

    ReplyDelete
  6. I've been following your work for a while now - you are truly talented! Thank you once again for sharing your process and your inspiring designs.

    ReplyDelete
  7. Thank you! And thank you Ashley, you made me blush :D

    ReplyDelete
  8. Your blog is so good ! Give me some idea for my jewellery too.
    Thank you :)

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco