Skip to main content

I Won Something! An Ultrasonic Cleaner.


Back in May this year the jewellery supply website Cooksongold ran a month long "lucky dip" competition where they had a prize draw for each day of the month. I entered quite a few of them as there were some lovely prizes on offer. 

I had bookmarked the competition results page so I could check if I'd won anything when they listed the winners on June 16 but completely forgot about it until the beginning of July. So I checked and was thrilled to see I'd won an Ultrasonic cleaner! Then I noticed I'd missed the claim date by two days and read that if prizes weren't claimed they would do a re-draw and send it to someone else. Oh noooo! I emailed Cooksongold anyway and they said it wasn't too late and that they'd get it in the post in the next few day. Yay!

So it arrived and I unpacked it...


The contents of the box can be seen on the side of the box in the top photo - the cleaner, two plastic trays, a plastic stand for two CDs plus a polishing cloth and the instruction booklet.
 This photo shows my cat Eddie in the box - if it's there he'll sit in it........

I was aware of ultrasonic cleaners but didn't really know how they worked, just that people used them to clean jewellery. I thought they were a bit of super high tech equipment and sounded very complicated but the cleaner I won costs about £48 and is a basic model. There are much more expensive, larger versions available too.

They work with water using tiny bubbles produced by high frequency sound waves that agitate the water and dislodge any dirt on a wide variety of objects - metal, plastic, glass, rubber and ceramics. Basically anything that can be safely put in water for a few minutes can be cleaned. There is a special cleaner you can use with it too for more grubby items which you would need to buy separately but normal washing up liquid is fine for most items.

I had a go with a pair of glasses and sunglasses...


I didn't need to use the plastic basket that comes with it so I just filled up the stainless steel tank with tap water to the max level mark, added a drop of washing up liquid, put the glasses in and switched it on.


I took this photo with the lid up to show the vibration in the water.


It's very simple to use - On, Off and Set. There are three settings - I used the middle one which is 3 minutes to clean my glasses. The digital display screen counts down the time as it's working. The glasses and sunglasses came out super clean and those bits of dirt that get trapped between the frame and the lenses came off too. You can use it to clean CDs and DVDs {that surprised me} and if you have a metal watch strap you can clean that too using the special plastic stand which keeps the watch out of the water.
When you've finished with it you just tip the water down the sink and dry the inside.

You do get a polishing cloth with the ultrasonic cleaner and it does recommend using it on tarnished jewellery before putting it in the cleaner as the cleaning process will remove dirt but it doesn't polish so your tarnished silver jewellery is not going to come out super shiny unless it was like that when it went in! 
That's useful to know if I ever want to clean a piece of jewellery I've oxidized with LOS - it shouldn't have any effect on the oxidized finish.

I'm not sure I'll use it much on jewellery but it is nice to have for cleaning other items and it was lovely to win something for a change!






Copyright © 2016 Cinnamon Jewellery. All rights reserved.

Comments

  1. Wow, congratulations Tracy. I have seen industrial ultra sonic cleaners before but never seen one that looked so sleek and compact. I thought they were for only cleaning jewelry. I am surprised to learn that you can clean cds and sunglasses too

    ReplyDelete
  2. Congratulations! My ultrasonic cleaner is ancient. Maybe it is time to upgrade after seeing your fancy new one! I never thought to use it for eyeglasses before. Great idea. Eddie is a riot. There is just something so irresistible to cats when they see a box.

    ReplyDelete
  3. Congratulations, that's awesome! Your kitty made me smile. Why do cats love boxes so much?! Mine does the same thing! The very first minute she sees a box, she owns it: no matter how small, she'll try to fit in!:)) Your cat is so adorable!
    Laura xo

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco